+62-21-344 2919      +62-21-3511 428      +62-811-9119-611   
    deltacrete@gmail.com      Senin - Jumat 9.00 - 17.00

Deltafloor FAB

Water Based Floor

DESCRIPTION

Deltafloor FAB is a water-based emulsion that suitable for indoors and outdoors application. It has a good adhesion, abrasion resistance, free from metal, easy to apply, weather resistance because non yellowing like epoxy, easy to clean, and anti-slip. Deltafloor FAB is designed especially for sport court, carpark, sidewalk, city park, playground, and paving block.

USES

  • Sportcourt
  • Sidewalk
  • Carpark
  • Playground
  • CityPark

ADVANTAGES

  • Easytoapply
  • Slipresistanceproperties
  • AbrasionandWeatherresistance
  • Excellentadhesiontoconcretesubstrate
  • Trafficabletofoot,vehiclewithrubberorplastic wheel
  • Fastcure
  • Easytocleanand Noodor

APPLICATION PROCEDURE

Surface Preparations

Make sure the surface to be coated is dry, clean, free from dirt, rust, grease, oil, mould or any other loose material. It will be best to sweep away all the debris and dust before application. If the surface is still damp it will make the application easy to peel off. To make the adhesion even better, the surface should be primed with a Deltabond SB1.

If surface is smooth, it needs to buff it first and apply with DeltabondSB1.

Applications

Deltafloor FAB can be applied with brush or roller. Apply evenly to the substrate following the recommended dosage (0.3 kg/ m2) for two coats. The second coat can be applied after the first coat has started to set and can support the following coat. Usually, it only takes 5 – 10 minutes maximum, depending on the weather and humidity around. After applying two coats, it takes minimal 1 day to traffic foot and 2 -3 days to use for sport court.

 

LIMITATION

Deltafloor FABshould not submerged for a long time. Deltafloor FAB cannot be applied to water ponding areas.

 

PACKAGING

Deltafloor FAB is supplied in 4 kg in gallon and 20 kgs in pail.


Technical Data

Appearance

Pigmented Liquid

Viscosity

8000 – 10000 cps

SG

1.2 – 1.4 gram/mL

Set to touch

± 40 minutes @ 25 oC (depends on the weather and humidity)

Setting Time

± 65 minutes @ 25 oC (depends on the weather andhumidity)

Foot Traffic

± 24 Hours (depends on the weather and humidity)

Ready to play

± 48 Hours (depends on the weather and humidity)

CLEANING

The equipment after application should be removed with clean water.

STORAGE

Store in a dry and cool place. Protect against moisture. Store container in a well-ventilated place. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.

In this case however, the properties required for the intended use must be checked for quality assurance reasons

FIRE

Deltafloor FAB is non-flammable material.

CODE C10 – 08/23

Our Location

PT. Deltacretindo Wira Mandiri
  JL. Pintu Air IV No. 41A
  Jakarta, Indonesia 10710
  +62-21-344 2919
  +62-21-3511 428
  +62-811-9119-611
   :  deltacrete@gmail.com

haki cm

© 2017 Deltacretindo. All Rights Reserved. Powered By GM-Portalindo