Acrylic Emulsion Cement and Water Based Concrete Bonding Agent
DESCRIPTION
Deltabond AS is modified acrylic as bonding agent for concrete and mortar. This milky white, water based emulsion of medium viscosity, which dries to a transparent film. Deltabond AS is resistant to hydrolysis and can therefore be used for external applications.
USES
Deltabond AS is recommended for bonding concrete and mortar, and primer for cementitious repair system. Deltabond AS may also improve cement mortar properties such as tensile properties.
ADVANTAGES
• Have good adhesion in concrete
• Improves the flexural strength and tensile strength properties
• Easy to dilute and apply
• Compatible with all common hydraulic cements
• Improves plasticity
• Contains no chloride that may reduce strength in longer term usage
INSTRUCTION FOR USE
Surface Preparation
The substrate must be sound, clean and free from oil, grease, rust mould and other loose material. Absorbent porous substrates must be wetted to saturation.
Application
Immeaditelly before priming, all the old concrete surfaces should be saturated with water. Apply Deltabond AS with the dosage of 16 – 20 % of cement content into a slurry consistency, and then lay the new concrete while the bonding is still tacky.
Cleaning
Immediately after use, wash all tools with clean water.
LIMITATIONS AND PRECAUTIONS
Do not use Deltabond AS when exposed into a running water, exposure to heavy rainfall prior to final set may differ the end result. As bonding coat without adding cement. Avoid contact with skin or eyes; any contamination should be washed immediately with plenty of water. Gloves and protective clothing are recommended.
TECHNICAL DATA
Appearance |
White, Milky Liquid |
pH |
7 - 9 |
Viscosity (Spindle;Rpm : 3;20) cps |
500 - 1500 |
Shelf Life |
1 year when unopened |
Packaging |
5 kg jerry can and 30 kg jerry can |
HEALTH AND SAFETY
Avoid inhalation contact with the skin or eyes. Wear suitable protective clothing eye protection, gloves and respiratory equipment, particularly in confined spaces. In case of contact with the skin, rinse with plenty of clean water, then cleanse thoroughly with soap and water. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. if swallowed week medical attention immediately.
FIRE
Deltabond AS is non – flammable materials.